Philips HDC-TM20 Camcorder User Manual


 
12
VQT2B30
13 SD card open lever [OPEN] (l 23)
14 Audio-video output terminal [A/V]
(l 92, 108)
Use the AV cable (only the supplied cable).
15 Component terminal [COMPONENT]
(l 92)
16 HDMI mini connector [HDMI] (l 92, 97)
17 Access lamp [ACCESS] (l 9, 23)
18 Card slot (l 23)
19 SD card cover (l 23)
20 Built-in flash (l 65)
21 Lens (LEICA DICOMAR)
22 Lens hood
Rotate the lens hood counter-clockwise A to
remove it. In order to attach it, place into slot B,
and then rotate it clockwise C.
Attach the MC protector or the ND filter of the
Filter Kit (VW-LF43NE; optional) in front of the
lens hood.
When fitting the tele conversion lens
(VW-T4314H; optional) or the wide conversion
lens (VW-W4307H; optional), first remove the
lens hood.
23 Remote control sensor (l 38)
24 Recording lamp (l 29)
25 Video light (l 54)
Lens cover A
The lens cover opens in
recording mode. (l 24)
20 21
22
23
2425
Be careful about the following.
When 2 lens accessories, such as the ND filter
and tele conversion lens, are fitted and the
zoom lever is pressed toward the W side, the
4 corners of an image will be darkened.
(Vignetting)
(When fitting 2 lens accessories, first remove
the lens hood and then fit them.)
Attaching the lens cap
(Included in the Filter Kit
(VW-LF43NE; optional))
When the filter kit (VW-LF43NE; optional) is
used, protect the lens surface while the unit
is not used with the lens cap supplied with
the filter kit.
To attach or remove the lens cap, hold both
sides of the lens cap with the tips of your
finger and thumb.