Philips HDC-TM20 Camcorder User Manual


 
138
VQT2B30
If scenes do not change smoothly when played back on another device
The images may be still for several seconds at the joins between the scenes if the following operations
are performed when multiple scenes have been continuously played back using another unit.
Just how smoothly the scenes will be played back depends on the playback unit. Depending on the
unit used, the images may stop moving and become still for a moment even when none of the
following conditions are applicable.
It may not playback smoothly when the editing of scenes were done with the HD Writer AE 1.0, but it
will playback smoothly if you set [Seamless settings] in the HD Writer AE 1.0. Refer to the operating
instructions for the HD Writer AE 1.0.
When the scenes were recorded on different dates
A The image will be still for several seconds wherever the date changes.
B The images are played back smoothly if the scenes were recorded on the same date.
When scenes lasting under 3 seconds have been recorded
1 3 or more seconds
2 Under 3 seconds
A The image will be still for several seconds after a scene which lasts under 3 seconds.
When PRE-REC was used for recording
1 Normal recording
2 PRE-REC recording
A The picture momentarily stops at the end of the last scene that was recorded normally before
PRE-REC recording.
1.1.2010 2.1.2010 3.1.2010