89
VQT2B30
(Only when [SELECT DATE] is selected in
step 4)
Touch the date to be copied.
≥ When touched, the date is selected and
surrounded by red. Touch the date again to
cancel the operation.
≥ Up to 99 dates can be set in succession.
6 (Only when [SELECT SCENES]/[SELECT
DATE] is selected in step 4)
Touch [Enter]/[ENTER].
7 When the confirmation message
appears, touch [YES].
≥ If 2 or more SD cards are necessary to copy,
change the card following the instructions on
the screen.
8 Touch [EXIT] when the copy
complete message is displayed.
≥ The thumbnail view of the copy destination is
indicated.
When you stop copying halfway
Touch [CANCEL] or press the MENU button
while copying.
≥ It is impossible to compress motion pictures or
still pictures on the copy source into the
capacity that can be accommodated by the
usable space on the copy destination.
≥ Depending on the following conditions, the
time it takes for copying may be longer.
jThe number of recorded scenes is large.
jThe temperature of the unit is high.
≥ If some motion pictures or still pictures have
already been recorded to the copy destination,
then the same date may be assigned or
images may not display by date when the list
by date is selected.
≥ Motion pictures that have been recorded on
another device may not be copied. Data
recorded on a PC with HD Writer AE 1.0, etc.
cannot be copied.
≥ Protection and DPOF settings will be cleared
on the copied motion pictures and still pictures
when copying motion pictures and still pictures
with protection and DPOF settings.
≥ The order in which the scenes or still pictures
were copied cannot be changed.
Approximate time for copying
/
To copy a 4 GB SD card with full motion
pictures to a built-in memory/HDD:
10 min to 20 min
To copy 600 still pictures (approx. 600 MB):
5 min to 10 min
If you will delete the motion pictures or still
pictures after copying is complete, be sure
to play back the motion pictures or still
pictures to check that they have been
copied to correctly before deleting.