Philips HDC-TM20 Camcorder User Manual


 
40
VQT2B30
The following modes appropriate for the condition are set just by pointing the unit to what you want to
record.
When this unit is purchased, the Intelligent auto mode is set to on.
Modes are selected automatically by the unit,
so it may not choose desired mode depending
on the recording conditions.
Brightness may change suddenly or flicker
when set to on.
In the portrait mode, one that is bigger and
close to centre of the screen will be surrounded
by an orange frame. (l 61)
Optical image stabilizer function (l 52) is set
to on in all modes.
In the following case, faces may not be
detected in some recording conditions.
jFaces are not full-faces
jFaces tilt
jFaces are not completely exposed (for
instance wearing sunglasses)
jThe size of a face is small on the screen.
jWhen the digital zoom is used
The function may not operate properly in some
recording conditions, even if faces are
detected.
Intelligent auto mode
Intelligent auto button
Press this button to switch on/off the
intelligent auto mode.
Mode Scene/Effect
Portrait When the object is
a person
Faces are detected
and focused
automatically, and
the brightness is
adjusted so it is
recorded clearly.
Scenery Recording outdoors
The whole landscape
will be recorded
vividly without whiting
out the background
sky, which may be
very bright.
Spotlight Under a spotlight
Very bright object is
recorded clearly.
Low light Dark room or
twilight
It can record very
clearly even in a dark
room or twilight.
Mode Scene/Effect
Normal Other situations
Contrast is adjusted
automatically for
clear image.