Filter
Top Products
14
PREPARING THE CAMCORDER FOR USE
INSERTING/REMOVING A
VIDEO CASSETTE
You can open the cassette compartment to in-
sert/remove a video cassette whenever a power
source is connected to the camcorder, whether
or not the camcorder is turned on.
1. Press
STOP/EJECT
to open the cassette
compartment.
2. Insert a VHS cassette into the cassette
compartment with the side label facing you
and the spine label facing up, then gently
press the cassette compartment door until
it closes.
Caution:
Never insert anything except a
VHS video cassette into the cassette com-
partment.
To remove a cassette, press
STOP/EJECT
, wait
for the cassette compartment door to open, and
pull out the cassette.
Caution:
Always remove the cassette before
storing the camcorder.
SETTING THE POWER SWITCH
While pressing and holding down the red button
in the center of
POWER
, slide it to
CAMERA
for
video recording or to
VCR
for playback. The
POWER indicator lights.
Slide
POWER
to
OFF
to turn off the camcorder.
PREPARING/ADJUSTING THE
VIEWFINDER
The camcorder’s viewfinder is set to this posi-
tion at the factory.
Before you carry the camcorder by its shoulder
strap or store it, return the viewfinder to this po-
sition (see “Setup” on Page 17).
OFF VIDEOCAM
POWER
16-830.fm Page 14 Wednesday, July 21, 1999 9:32 AM