Filter
Top Products
16
SETTING/CHANGING
THE DATE AND TIME
1. Slide
POWER
to
CAMERA
. The POWER
indicator lights.
2. If the currently set date does not appear in
the viewfinder, repeatedly press
DATE/TIME
until the date appears and the month’s digit
flashes.
If the month’s digit does not flash, press
and hold down
DATE/TIME
, then press
STOP/EJECT
once.
3. Repeatedly press
FAST-F
or
REWIND
to
move forward or backward through the
months until the viewfinder shows the cor-
rect month. To quickly move forward or
backward through the months, press and
hold down
FAST-F
or
REWIND
.
4. When the viewfinder shows the correct
month, press
STOP/EJECT
. The day’s digit
flashes.
5. Repeat Steps 3-4 to set the correct day,
year, hour, minute, and AM (if the hour is an
AM hour) or PM (if the hour is a PM hour).
6. When you have set the date and time,
repeatedly press
DATE/TIME
to confirm the
information you set.
7. To change the displayed date and time,
repeat Steps 2-6.
A
M
195191
002:1
▲
▲
▲
▲
A
M
19519
002:1
1
▲
▲
▲
▲
1
16-830.fm Page 16 Wednesday, July 21, 1999 9:32 AM