Filter
Top Products
15
Setup
Before you can use the camcorder, you must set
up the viewfinder.
1. Rotate the viewfinder support until it stops,
as shown.
Caution:
The viewfinder support rotates
only 90°. Do not force it past this point.
2. Rotate the eyepiece about 180° until it
stops, as shown.
Caution:
The eyepiece rotates only about
225°. Do not force it past this point.
Adjustment
Once you set up the viewfinder, you can adjust
the position of the viewfinder support and angle
of the eyepiece, so you can see through the
eyepiece easily.
1. Slide
POWER
to
CAMERA
or
VCR
.
2. To adjust the viewfinder support, slide it to
the left or right until the eyepiece is directly
in front of your right eye.
3. To adjust the eyepiece, rotate it up or down
until you can see through it.
4. Turn the focus control on the right side of
the eyepiece until the image is clear and
sharp.
Focus Control
16-830.fm Page 15 Wednesday, July 21, 1999 9:32 AM