Filter
Top Products
31
4. Insert a cassette into the camcorder.
5. Press
PLAY
on the camcorder to play the
tape to the point where you want audio/
video dubbing to end. Then press
REC/
PAUSE
to pause it.
6. Press
DISPLAY
.
M
appears in the view-
finder next to the tape counter. Then press
RESET
to reset the tape counter to
0000
.
7. Press
REWIND
to rewind the tape past the
point where you want to start audio/video
dubbing, then press
PLAY
. When you see
the point of the tape where you want to
start audio/video dubbing, press
REC/
PAUSE
.
8. Press
PLAY
and
DUBBING AUDIO/VIDEO
together twice. and the picture you
are dubbing appear in the viewfinder.
Note:
If you accidentally press
PLAY
and
DUBBING AUDIO/VIDEO
together only
once, appears in the viewfinder
instead. If this happens, simply press
PLAY
and
DUBBING AUDIO/VIDEO
together again.
9. Press
REC/PAUSE
on the camcorder.
Audio/video dubbing begins.
When the tape counter shows
0000
, the
camcorder automatically stops the tape,
and video and audio dubbing stop.
Notes:
• To protect the tape and conserve battery
power, the camcorder automatically
stops and turns itself off if left in the
record/pause mode for more than 5 min-
utes.
• To prevent feedback squeals, turn down
the volume control on any TV or TV/
monitor connected to the camcorder.
10. Press
STOP/EJECT
on the camcorder to
stop audio/video dubbing at any time.
16-830.fm Page 31 Wednesday, July 21, 1999 9:32 AM