Filter
Top Products
35
ADDITIONAL INFORMATION
TROUBLESHOOTING
If you follow the instructions in this manual and still have trouble operating your camcorder, refer to
the following troubleshooting chart. If you still cannot solve the problem, take your camcorder to your
local Radio Shack store for assistance.
FUNCTION PROBLEM POSSIBLE REASON SUGGESTION
POWER No power. • Safety devices are
functioning.
• Disconnect the AC
adapter/charger’s
power cord, then
plug it into the AC
outlet again.
• The battery pack is not
charged.
• Charge the battery
pack.
• The AC adapter/
charger is not correctly
connected.
• Reconnect the AC
adapter/charger.
The camcorder turns
off soon after you turn
it on.
The battery pack might be
weak.
Recharge the battery
pack and try again.
RECORDING Power on, but no
image in viewfinder.
• Lens cap on. • Remove the lens
cap.
•
POWER
set to
VCR
.
•
A/V OUT/IN
set to
IN
.
• Slide
POWER
to
CAMERA.
•Set
A/V OUT/IN
to
OUT
.
Cannot record.
POWER
set to
VCR
. Slide
POWER
to
CAM-
ERA.
Poor color when tape
is played on a TV/
monitor.
TV not properly adjusted. Adjust the TV.
Recording is fuzzy. • Poor lighting. • Use additional light-
ing.
• Dust or other foreign
matter on lens.
• Clean the lens.
16-830.fm Page 35 Wednesday, July 21, 1999 9:32 AM