Filter
Top Products
Recording
18
Video Cassettes
We recommend that our cassettes be used with your camcorder. Use of poor quality or
damaged tapes can contaminate the video heads. Head cleaning is not covered under
warranty and is considered normal maintenance.
1. Attach a power supply and turn on the
camcorder.
2. Press the EJECT button to open the
cassette compartment.
3. Insert the tape with the safety tab on
top and the tape window facing out.
Inserting or Removing Cassettes
Erase Protection — Safety Tab
You can protect your video cassettes
from being erased by closing the safety
tab. To erase a previous recording, open
the safety tab and record over it.
Caution: Insert the cassette so the
safety tab is at the top and the tape
window is facing out. The cassette
should slide easily in the compartment.
Do not force the cassette.
4. Gently press the compartment where
it is labeled PUSH until it clicks into
place. The top closes automatically.
CAUTION: Do not press down on the
top or you may damage your
camcorder.
Safety Tab
To Prevent Erasure
Close Safety Tab
(Expose Red)
To Record Again
Open Safety Tab
(Red Disappears)
Recording Times
The camcorder records in standard speed
(SP). See the chart for the maximum SP
recording times for some 8mm cassettes.
P6-15 15 Minutes
P6-20 20 Minutes
P6-45 45 Minutes
P6-60 60 Minutes
P6-90 90 Minutes
P6-120 120 Minutes
P6-150 150 Minutes
Cassette Recording Time
PUSH Here to Close
EJECT
Button