Filter
Top Products
51
Camcorder does not
respond to remote
control
Tape stops during
rewind or fast
forward
Camcorder remains
in pause mode
Sound is too low or
distorted
Poor auto-focus
operation
Viewfinder displays
are out of focus
Trouble Checks
• Aim remote at camcorder’s remote control sensor.
• Remote’s lithium cell battery may be installed incorrectly.
See page 14.
• Remote control’s lithium cell battery may need replacing.
• Remote control sensor on camcorder exposed to direct
sunlight or strong artificial light.
• Time-counter memory may be on. Whenever an “M”
appears with the time-counter display, the camcorder will
stop rewinding (or fast forwarding) when counter reads M
0:00:00. Press REW or FFWD again to continue rewinding
or fast forwarding, or press COUNTER MEMORY on the
remote to turn off the memory-stop feature.
• Press PLAY or PAUSE to return to normal playback.
• Subject was too far from camcorder.
• Model Pro848 Only: Attach an external microphone.
See “Specifications” on page 56 for proper type.
• Subject is not in center of viewfinder or two subjects are
at different distances. Use the focus lock feature.
See page 26.
• Lens is smudged, and image appears unfocused.
• Eyepiece focus control is misadjusted.
• The small controls (B and C or F) on the bottom of the
viewfinder control the brightness and color (models
Pro848/Pro847) or focus (model Pro842) of the
viewfinder. These controls have been set at the factory
and should require no adjustment. If the brightness or
color (models Pro848/Pro847)/focus (model Pro842) of
the viewfinder ever does require adjustment, carefully
use a plastic screwdriver. Make the adjustments with
caution to prevent damaging the miniature controls.
Trouble Checks and Adjustments
(continued on next page)