Filter
Top Products
Playback
38
Installation
1. Attach the white plug on one end of
the audio/video cable to the AUDIO
IN jack on the TV (or VCR).
Notes: If your TV (or VCR) has stereo
AUDIO IN jacks, attach the plug to the one
labeled MONO. If one is not labeled
MONO, you may need a Y-adapter, such
as AH25, shown on page 43 to hear both
channels.
2. Attach the yellow plug to the VIDEO
IN jack on the TV (or VCR).
Models Pro842 and Pro847 Only: Playback on TV (or VCR) with
AUDIO/VIDEO IN Jacks
To connect your camcorder to a TV monitor (or VCR) with AUDIO/VIDEO IN jacks,
you will need the supplied audio/video cable. If your TV is already connected to a
VCR, you can attach the camcorder to the VCR and watch what the camcorder is
recording or playing on the TV.
3. Attach the white plug on the other end
of the audio/video cable to the
A (audio) jack (located behind the A/V
cover) on the side of the camcorder.
4. Attach the yellow plug to the yellow
V (video) jack on the camcorder.
AUDIO
IN
VIDEO
IN
AUDIO
IN
L
R
VIDEO
IN
Back of
Mono VCR or
TV Monitor
Back of
Stereo VCR or
TV Monitor
Optional Y-Adapter
(such as AH25)
White
Audio
Plug
White
Audio
Plug
Yellow Video Plug
Yellow Video Plug
Audio and Video Jacks
Located Behind A/V Cover
White
Audio
Plug
Audio/Video
Cable
Audio/Video
Cable
Yellow Video Plug
White
Audio
Plug
Yellow
Video
Plug
OR
A
V