Filter
Top Products
014
Connecting to a power source
Connecting to a power source
You can charge the rechargeable battery (SLB-1137D) by using the
SAC-46 KIT which consists of the AC adapter (SAC-46) and the USB
cable (SUC-C2).
When the SAC-46 and SUC-C2 are combined, they can be used as an
AC cable.
Using an AC cable:
Connect the AC adapter to the
USB cable.
It can be used as a power cable.
Using a USB cable:
Remove the AC adapter (SAC-46).
You can download stored images to
your PC (p.118) or supply the power
to your camera through the USB
cable.
Important information about USB cable usage.
Use a USB cable (SUC-C2) with the correct specifi cation.
If the camera is connected to the PC through a USB hub :
connect the camera directly to the PC.
If the camera and other devices are connected to the PC at
the same time : remove other device.
If the USB cable is connected to a port located on the front
of the PC : remove the cable and connect it to a port located
on the back of the PC.
If the USB port of the PC doesn’t meet the Power output
standard (5V, 500mA), the camera may not be charged.