Filter
Top Products
088
Playback (
Playback (
)
)
When this menu is selected without inserting a memory
card, the [No Card!] message will be displayed.
If there is not enough space available in the memory card
to copy saved images in the internal memory (190MB), the
[Copy To Card] command will copy only some of the images
and display [Memory Full!] message. Then the system will
return to the Playback mode. Please be sure to delete any
unnecessary fi les to free up space before inserting the
memory card into the camera.
When you move the images that are stored in the internal
memory by doing [Copy To Card] to the card, the next
number of fi le names will be created in the card to avoid
duplication of the fi le name.
– When the [Reset] of the [File] setup menu is set : The
copied fi le names start from after the last stored fi le
name.
– When the [Series] of the [File] setup menu is set : The
copied fi le names start from after the last captured fi le
name. After completing [Copy To Card], the last stored
image of the last copied folder is displayed on the LCD
monitor.
PictBridge
PictBridge
You can use the USB cable to connect this camera to a printer that
supports PictBridge (sold separately) and print the stored images
directly. Movie clips and voice fi les cannot be printed.
Setting up the camera for connection to the printer
1.
Connect the camera and printer with
USB cable.
2.
Select the [Printer] menu by pressing
Up
/
Down
button and press the
OK
button.
■ Connecting the Camera to a Printer