Filter
Top Products
ENGLISH
3838
Basic Recording
Self Record using the Remote Control (Setting the Self Timer) (SC-D364/D366 only)
✤ The SELF TIMER function works only in <Camera> mode. ➥page 19
✤ When you use the SELF TIMER function on the remote control, the recording begins automatically in 10 seconds.
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE].
3. Press the [SELF TIMER] button until the appropriate indicator is displayed.
4. Press the [Start/Stop] button to start the timer.
■
SELF TIMER starts counting down from 10 with a beep sound.
■
In the last one second of the countdown, the beep sound gets faster, then recording
starts automatically.
■
If you want to cancel the SELF TIMER function before recording, press the
[SELF TIMER] button.
5. Press the [Start/Stop] button again when you wish to stop recording.
[ Notes ]
■
Do not obstruct the remote control sensor by putting obstacles between the remote
control and Camcorder.
■
The remote control range is 4 ~5m (13 ~17 ft).
■
The effective remote control angle is up to 30 degrees left /right from the center line.
■
Using a tripod is recommended for delayed recording.
œ
1
3
4 5
œ