Samsung SC-D363 Camcorder User Manual


 
ENGLISH
5151
Advanced Recording
Setting the White Balance
The White Balance function works in both <Camera> and <M.Cam> modes. (SC-D363/D364/D365/D366 only) page 19
The White Balance is a recording function that preserves the unique image color of the object in any recording condition.
You may select the appropriate White Balance mode to obtain good quality image color.
<Auto ( )> : This mode is generally used to control the White Balance automatically.
<Indoor ( )> : This controls the White Balance according to the indoor ambience.
- Under halogen or studio/video lighting
- Subject is of one dominant color
- Close up
<Outdoor ( )> : This controls the White Balance according to the outdoor ambience.
- In daylight, especially for close up and where the subject is of one dominant color.
<Custom WB ( )> : You can adjust the white balance as you wish based on the shooting
environment.
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE] or [MEMORY]. (SC-D363/D364/D365/D366 only)
3. Press the [MENU] button.
The menu list will appear.
4. Move the [Zoom] lever up or down to select <Camera>, then press the [OK] button.
5. Move the [Zoom] lever up or down to select <White Balance>, then press the [OK] button.
6. Move the [Zoom] lever up or down to select desired mode (Auto, Indoor, Outdoor or Custom WB),
then press the [OK] button.
To explain about the Custom WB:
- Select Custom WB and press the OK button. (“set white balance” will appear and blinks on the
screen.)
- Place the white object under the desired lighting then press the OK button.
(The OSD will disappear and the Custom WB icon ( ) will be displayed.)
7. To exit, press the [MENU] button.
When the <Auto> mode is selected, no icon is displayed.
[ Notes ]
You can directly access the White Balance function using the [QUICK MENU] button. page 20
The White Balance function will not operate in EASY.Q mode.
Turn the Digital Zoom off (if necessary) to set a more accurate white balance.
Reset the white balance if lighting conditions change.
During normal outdoor recording, setting to Auto may provide better results.
Buttons other than EASY.Q, [MENU] and [OK] will not work during setting the Custom WB.
Pressing the [MENU] button while setting the Custom WB will cancel the Custom WB setting and sets the White Balance to Auto.
A
60min
0:00:10
SP
STBY
7
œ
<When the Outdoor option was selected>
Auto
Auto
Off
Off
Off
Off
Move Select Exit
MENUOKZOOM
Camera Mode
Camera
Program AE
White Balance
Visual Effect
16:9 Wide
DIS
Digital Zoom
Move Select Exit
MENUOKZOOM
Auto
Indoor
Outdoor
Custom WB
A
4
6
Camera Mode
Back
Program AE
White Balance
Visual Effect
16:9 Wide
DIS
Digital Zoom