ENGLISH
55
Notes regarding the Video Head Cleaning
Notes regarding the LCD Screen, Viewfinder, Lens
Notes and Safety Instructions
Notes regarding the Rotation of the LCD Screen
Please rotate the LCD Screen carefully as illustrated.
Over rotation may cause damage to the inside of the hinge that connects the LCD Screen to the Camcorder.
1. Open the LCD Screen 90 degrees to the Camcorder
with your finger.
2. Rotate it to the best angle to record or play.
■
If you rotate the LCD Screen 180 degrees so it is facing
forward, you can close the LCD Screen with the facing out.
■
This is convenient during playback operations.
[Note]
Refer to page 29 to adjust brightness and color of the LCD Screen.
1. Direct sunlight can damage the LCD Screen, the inside of the Viewfinder or the Lens.
Take pictures of the sun only in low light conditions, such as at dusk.
2. The LCD Screen has been manufactured
using high precision technology.
However, there may be tiny dots (red, blue or green in color) that
appear on the LCD Screen. These dots are normal and do not
affect the recorded picture in any way.
3. Do not pick up the Camcorder by holding the Viewfinder, LCD
Screen or Battery Pack.
4. Applying excessive force to the Viewfinder may damage it.
■
To ensure normal recording and a clear picture, clean the video heads regularly.
If a square block-shape distorts playback, or only a blue screen is displayed, the video heads may be dirty.
If this happens, clean the video heads with a dry type cleaning cassette.
■
Do not use a wet-type cleaning cassette. It may damage the video heads.
LCD Open Knob
180 degrees (max.)
90 degrees (max.)
90 degrees
to the Camcorder
COLOR NITE
M
ENU