Filter
Top Products
-
-
1.
2.
■
3.
4.
✤
✤
Preparation
2323
ENGLISH
Connecting a Power Source
There are two types of power source that can be connected to your
camcorder.
- The AC Power Adapter and AC cord : used for indoor recording.
- The Battery Pack : used for outdoor recording.
To use the AC Power adapter and DC Cable
1. Connect the AC Power adapter to
the AC cord.
2. Connect the AC cord to a wall socket.
Note
■
The plug and wall socket type may differ
according to your resident country.
3. Connect the DC cable to the DC jack
socket of the camcorder. (When the
battery is attached on the set, you should
keep outside the projection of the DC
cable.)
4. Set the camcorder to each mode by
holding down the tab on the power
switch and turning it to the CAM or
PLAYER mode.
To select the CAMCORDER mode
✤ If you want to use this unit as a camcorder,
set the mode switch to TAPE position.
✤ If you want to use this unit as a DSC (Digital Still
Camera), set the mode switch to MEMORY STICK
position.