Filter
Top Products
14_ connecting with other device
connecting with other device
CONNECTING THE USB
1. By factory default, a USB port is provided for external connection.
2. You can connect a USB HDD, USB memory or mouse to the USB port.
3.
If a USB HDD is connected to the system, recognition and settings are available in “Menu > Setting the Device >
Storage Device”. (Page 41)
4. This product supports hot-plugging, which connects/removes the USB device during the system operation.
J
If you use the USB device for Backup purposes, format it with FAT32 on PC if it is not formatted on the DVR.
CONNECTING THE CAMERA
Equipped with the IR LED and the illumination sensor, enables you to monitor at night as well as in daytime.
The camera is suitable for both internal and external use.
Please make sure not to fully expose the camera to rain. The camera must be installed under a shelter to avoid exposure to
excessive rain or moisture.
Name Description
a
IR LED These infrared LED’s are controlled by the illumination sensor.
b
Lens Focal length of 3.6mm enables you to cover relatively longer range of monitoring.
c
Illumination Sensor Detects incoming light to control the IR LED.
d
Camera Fitting
Groove
Groove that is used to fit the camera bracket.
There are two grooves; one on the top and one on the bottom.
e
BNC Cable BNC terminal for video signal output.
f
Power Cable Used to plug the power cable.
a
b
c
d
e f