Filter
Top Products
BRACKET-HDD(B)
Secondary HDD
IDE Connector
Primary HDD
IDE Connector
02 INSTALLATION
installation _11
6. To add another hard disk after adding a hard
disk completes, remove the Bracket-HDD(B)
on the DVD-RW driver.
7. Fix the hard disk to the Bracket using 4
(B)SCREW-MACHINE (6-32UNC, L4. 2)
provided when purchasing the HDD. The
screws should be fastened not to come
loose. Fix the Bracket-HDD(B) using screws
after aligning 4 spots on the bottom and
mounting holes.
8. When adding hard disks completes, connect
the power supply cable, signal transmission
cable (IDE Cable), and fan cable to the hard
disks.
9. After checking whether or not the
connections have no problem, close the
cover.
10. Fix the cover using screws. (Each of left and
right sides has 5 spots and the back side
has 1 spot.)
SHR-5162_Eng.indb 11 2007-06-18 ｿﾀﾀ・11:47:52