Filter
Top Products
04 LIVE
live _17
Full Screen (Single) mode:
Displays the selected channel in full screen.
4, 6, 7, 8, and 9 Split mode:
Displays 4, 6, 7, 8, 9 channels in each split
screen. You can select channel numbers on
your own using the MODE button on the front
panel or remote control. In 4-channel and
9-channel split modes, the screen page is
changed using the Direction buttons.
16 Split mode:
Displays 16 live channels on a 16-split screen.
The Auto Sequence is not available.
PIP (Picture in picture) mode:
Displays a small screen on a full screen. You
can change the channel number on a full
screen or small screen by pressing the ENTER
button and inputting the NUMERIC button.
To switch between main and sub screens,
press the ENTER button and press the LEFT
or RIGHT direction button. You can move
the sub screen to 5 different stages using the
UP/DOWN direction buttons.
Auto Sequence mode:
Sequentially displays all the channels at an
interval of auto sequence time. The auto
sequence time is set in Camera Configuration
on the menu.
Selecting live screen mode
Available modes are switched using the MODE
button and the NUMERIC buttons on the front
panel or remote control. The following figure
is the live modes transition diagram in the
SHR-5162 model.
The initial live screen shows the 16-split screen
mode at first. The SHR-5082 model starts from
the 9-split mode.
In the 9-split screen mode, the first screen
shows 9 channels (CH 1 to CH 9) and the
second screen shows the rest 7 channels
(CH 10 to CH 16) after pressing the RIGHT
direction button. If you press the RIGHT
direction button again, it changes to the Auto
Sequence mode.
Likewise, in the 4-split screen mode, the first
screen shows 4 channels (CH 1 to CH 4),
the second screen shows CH 5 to CH 8, the
third screen shows CH 9 to CH 12, the fourth
screen shows CH 13 to CH 16. If you press
the RIGHT direction button again, it changes to
the Auto Sequence mode.
Every time you press the MODE button, the
modes change in the following sequence:
16-split mode
9-split mode
4-split mode
6-split mode
7-split mode
8-split
mode
PIP mode
Auto Sequence mode
16-split mode.
Press the CH 1 to CH 16 button to see a full
screen of each channel after pressing the
ENTER button.
Press the MODE button after entering a full
screen channel in a split screen mode to return
to the previous split mode screen.
SETTING AUDIO ON/OFF
In other split modes except full screen mode,
16-split mode, and auto sequence mode,
you can choose a channel to be displayed by
pressing the ENTER and NUMERIC buttons. If
you set the selected channel to Audio On, you
can turn the Audio On and Off in live mode.
Audio On/Off setting in full screen
mode
In full screen mode, the audio of the selected
channel automatically turns on. You can turn the
audio On and Off by toggling the AUDIO button.
D
epending on the audio On/Off setting condition,
the Audio icon of the channel changes to yellow
and white.
Audio On/Off setting in 16-split
mode
When pressing the ENTER button in the 16-split
mode, the selection cursor appears for you to
select a channel. When you select a channel and
press the AUDIO button on the front panel or
remote control, the audio of the selected channel
is changed to On or Off.
D
epending on the audio On/Off setting condition,
the Audio icon of the selected channel changes
to yellow and white. You can have audio settings
on channel 1 to 4 in 16-split mode.
SHR-5162_Eng.indb 17 2007-06-18 ｿﾀﾀ・11:48:04