Filter
Top Products
First Prev Next Last Exit
No. Event Log List Date/Time
339 Video Loss CH[4] 2007-03-10 10:00:29
338 Video Loss CH[6] 2007-03-10 10:00:29
337 Video Loss CH[7] 2007-03-10 10:00:29
336 Alarm Detection CH[3] 2007-03-10 10:00:29
335 Motion Detection CH[1] 2007-03-10 10:00:29
334 Alarm Detection CH[2] 2007-03-10 10:00:09
333 Video Loss CH[4] 2007-03-10 09:59:38
332 Video Loss CH[5] 2007-03-10 09:59:30
Event Log
MENU
MENU SETUP
System
Camera
Monitoring
Record Mode
Event Record
Schedule
Backup
Network
Date/Time/Language
Password
Load Factory Default
System Log
Event Log
System Information and Setup
Storage Setup
HDD Mode Setup
Remote Control Device
Move/Control Select Exit
OK
Cancel
Sure to default Setting?
First Prev Next Last Exit
No. System Log List Date/Time
339 Setup Start (Local) 2007-03-10 10:00:29
338 Setup End (Local) 2007-03-10 10:00:29
337 Setup Start (Local) 2007-03-10 10:00:29
336 Setup End (Local) 2007-03-10 10:00:29
335 Time Change 2007-03-10 10:00:29
334 Play Back Start 2007-03-10 10:00:09
333 Power Failure Recorery 2007-03-10 09:59:38
332 System Start 2007-03-10 09:59:30
System Log
22_ menu setup
Load Factory Default
It is used to initialize all the settings to the factory
default values. The recorded video data will not
be removed. Select OK to start initialization.
System Log
The System Log is used to check the important
history records by an administrator. The log data
includes the system-related logs such as system
start, system termination, menu setup change,
and the like.
Available action buttons are:
First: Moves to the first log page.
Prev: Moves to the previous log page.
Next: Moves to the next log page.
Last: Moves to the recent log page.
The system logs are as follows:
System Start Starts the system.
Login(Admin) Viewer Login (Admin)
Logout(Admin) Viewer Logout (Admin)
Login(User) Viewer Login (User)
Logout(User) Viewer Logout (User)
Setup Start (Local)
Enters into the menu.
Setup End (Local)
Comes out of menu.
Setup (Remote):
Viewer
Sets the menu.
Play Back Start Starts the playback.
Play Back End Ends the playback.
Power Failure
Recovery
Returns the system after
power interruption.
Time Change Changes the Date/Time.
Load Factory Default Initializes the system.
System Upgrade Changes the system S/W.
Disk Full No Space in the HDD
Backup Start Starts the backup.
Backup End Ends the backup.
Backup Stop Stops the backup.
Backup Fail Backup Failure
ATA HDD Erase Erases the ATA Data.
USB HDD Erase
Erases the USB HDD data.
USB MEMORY
Erase
Erases the USB MEMORY data.
Overwrite Playback
Stop
Stops the playback by
overwrite.
Backup
Stop(Overwrite)
Stops the backup by
overwrite.
Event Log
It is used to check the recorded events like
alarm, motion, video loss, and such.
The log data contains the event execution data
and time.
First: Moves to the first log page.
Prev: Moves to the previous log page.
Next: Moves to the next log page.
Last: Moves to the recent log page.
The event logs are as follows:
Video Loss CH[N] Means the occurrence
of Channel [N] Video
Loss.
Alarm Detection CH[N] Means the occurrence
of Channel [N] alarm.
M
otion Detection CH[N] Means the occurrence
of Channel [N] Motion.
SHR-5162_Eng.indb 22 2007-06-18 ｿﾀﾀ・11:48:11