PTZ camera control _37
07 PTZ camera control
PAN
Use the LEFT/RIGHT buttons on the front
panel or remote control in PTZ Camera Control
Mode to control the camera horizontally.
TILT
Use the UP/DOWN buttons on the front panel
o
r remote control in PTZ Camera Control Mode
to control the camera vertically.
ZOOM
Press the TELE/WIDE buttons on the front
panel or remote control in PTZ Camera Control
Mode to zoom in or out the image displayed.
PRESET SETUP
A preset is a specific position of the PTZ camera
and you can store the positions up to 20.
For AD Protocol PTZ camera, you can
store up to 7 presets only.
To set a preset
1. Press the PRESET button on the front panel
or remote control in Single Screen PTZ
Camera Control Mode ad select Preset.
2. Press the ENTER button.
3. Press the RIGHT direction button to move
the cursor rightward and press the ENTER
button. Now perform the PTZ operations to
get the wanted position screen and press
the ENTER button again to exit from the
PTZ motion mode.
4. Press the ENTER button in the Position
Name field to open the virtual keyboard.
N
ow enter the position name using the virtual
keyboard and press OK to confirm the input.
If you want to delete both position and
position name, select Del that is located
in the same row. If you press Del
,
all positions and position names are
removed.
CAMERA MENU SETUP
The PTZ camera provides its own menu. This
menu enables you to define several conditions
for PTZ control.
Only the Pan. and Samsung protocol
cameras are authorized for this setup.
T
o move to the menu screen, press the PRESET
button on the front panel or remote control in
Single Screen PTZ Camera Control Mode.
To return to the upper menu, press the PRESET
button.
PTZ
TELE WIDE
VIEW
PRESET
PTZ
TELE WIDE
VIEW
PRESET
Preset Camera Menu Exit
Preset Camera Menu Exit
ExitNextPrev
No. Position Name Del
1 Del
2 Del
3 Del
4 Del
5 Del
6 Del
7 Del
8 Del
** MAIN MENU V2.0 **
CAMERA...
VIDEO SET...
PRESET...
AUTO SET...
OTHER SET...
PTZ Control
SHR-5162_Eng.indb 37 2007-06-18 ソタタ・11:48:54