Filter
Top Products
78_ appendix
PROBLEM SOLUTION
The Audio icon of Smart Viewer
is left deactivated in Live mode.
Setting Audio to On in the Camera
menu of your DVR will make no
difference.
If your PC has no Audio driver or has some problem
with Audio play by an Audio driver, the Audio icon
will be deactivated. Please check Audio driver
installation status.
When selecting the channel which
PTZ Camera is connected to in
the Live mode of Smart Viewer,
click the “Menu Control” button
among PTZ setup buttons to enter
the Function Menu mode in PTZ
Camera, and return from the other
channel, the PTZ related buttons
have been initialized.
PTZ control is available in both Smart Viewer and
your DVR. Other user might control the PTZ for your
DVR to terminate the PTZ Camera Menu or Auto
Pan/Scan/Pattern motions while you select the other
channel. This may cause the initialization.
No Time Bar in the Search
Time Line can be converted into 2 modes, General
(24 Hour Display) and Extension (2 Hour Display). In
Extension mode, Time Bar may not be seen in the
current time. Please enter General mode or click the
LEFT or RIGHT button to search Time Bar.
“NO HDD” icon and error message
pops up.
Please check the HDD connection status. If this
problem persist without connection failure, contact
the technical support for checking hard disk.
DVR device does not show what
has been upgraded after adding a
hard disk.
Make sure that the additional external HDD installed
is one of the devices listed on the compatibility list
of HDDs. The list of the compatible devices with
Samsung DVR can be obtained from your vendor.
The connection status is not shown
after connecting the external
storage device, USB memory, USB
HDD and such.
M
ake sure that the external storage device installed is
one of the storage devices listed on the compatibility
list of storage devices. The list of the compatible
devices with Samsung DVR can be obtained from
your vendor.
SHR-5162_Eng.indb 78 2007-06-18 ｿﾀﾀ・11:50:41