Filter
Top Products
86
USING THE Intelli-studio PROGRAM
Using Intelli-studio, the built-in editing program in your camcorder, you can transfer video/photo files onto
your PC and edit them on your computer. The Intelli-studio offers the most convenient way for you to manage
video/photo files by using the simple USB cable connection between the camcorder and your PC.
Step 1. Connecting the USB cable
1. Set the menu setting to "PC Software: On."
²
page 81
•
The default menu settings are displayed in the graphic to the right.
• If you have the SMX-C24, select the storage media (built-in or
memory card) in the settings menu.
²
page 30
2. Connect the camcorder and the PC with the USB cable.
• A new file saving screen appears with the Intelli-studio main
window.
• According to your computer type, the corresponding removable
disk window appears.
3.
Click "Yes" to start the uploading procedure. Click "Yes" to confirm.
• If you do not want to save a new file, select "No."
using with a Windows computer
Disconnecting the USB cable:
To disconnect the USB cable after completing the file transfer, you must follow these steps:
1.
Click the “Safely Remove Hardware icon” icon on the taskbar.
2.
Select “USB Mass Storage Device”, and then click “Stop.”
3.
If the “Stop a Hardware device” window appears, click “OK.”
4.
Disconnect the USB cable from the camcorder and PC.
Use the provided USB cable.
Don’t apply excessive force when inserting or extracting the USB cable into or from a USB jack.
Insert the USB plug after confirming you are inserting it in the correct direction.
We recommend using the AC power adaptor as power supply instead of the battery pack.
When the USB cable is connected, turning the camcorder on or off may cause the PC to malfunction.
If you disconnect the USB cable from the PC or the camcorder while transferring data, the data
transfer will stop and the data may be damaged.
If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable
along with other USB devices, the camcorder may not work properly. If this occurs, remove all USB
devices from the PC and reconnect the camcorder.
Intelli-studio may not run automatically. If this occurs, access My Computer or Windows Explorer,
open the drive that corresponds to your camcorder, and then run IStudio.exe.
•
•
•
•
•
•
•
•
Settings
Default Set
PC Software
TV Display
STBY
0:00:00 [475Min]
Off
On
Exit Move Select