Filter
Top Products
camera settings. Default setting is OFF.
OFF, 1-7 Days : This function is disabled in the OFF mode. 1-7
Days enables the Auto Refresh operation in the interval of the
selected days. Auto Refresh takes less than 10 seconds. The
message “Auto Refresh” disappears after finishing the operation.
5.7. Status
The status of PTZ camera setting is displayed.
CAM MODEL= 10NC Camera Model
CAM VERSION= 4.6 Camera S/W Version
DOME VERSION= 1.00 Control Board S/W Version
CON PROTOCOL=SAMSUNG TW Protocol Setup
DOME ID= 001 Dome Camera ID
CONTROLLER= Duplex-19200 Communication Mode Setup