Filter
Top Products
5.4. P/T Setting
5.4.1. Pan Limit
The moving range in the Pan direction can be limited.
Position : Moving range can be set up. Set the position from the
left using the Execution key. The stop position may change due
to the initialization by such operation as power resumption
depending on position setting. This does not mean it is out of
order.
On/Off : When this function is on, the limit is effective. Default
setting is Off.
5.4.2. Tilt Limit
Moving range in the tilt direction can be limited.
Position : Moving range can be set up. Set the position from the
top direction using the Execution key. The stop position may
change due to initialization by such operation as power