Filter
Top Products
5.4.4. Area Masking
If you want to exclude some areas for surveillance, they can be
turned into black. You can mask 4 parts of one screen.
Position : Use the Execution key to determine the position for
screen operation from the left.
On/Off : Operation of screen area masking can be determined.
Default setting is OFF.
Note
If Area Masking is set while the Camera is in the
Digital Flip posion, automatically the Camera moves
the initial position which is not set for the Digital Flip
and then Area Masking position can be set. This is
not a malfunction.
5.4.5. Prop. P/T
Pan and Tilt speeds can be changed depending on zoom
magnification. Tele will slow down the speed of Pan/Tilt and Wide
will increase the Pan/Tilt speed. It will take about 20 seconds for 1
cycle in Tele mode and about 3 seconds in the Wide mode. Default
setting is ON.ed. Default setting is OFF.