Filter
Top Products
Playback/Editing
98
Transferring files to your computer (for Windows)
5
Turn on the camera.
•
The computer recognizes the camera automatically.
If you set the USB option to Select Mode, select Computer from the
pop-up window.
6
Select a folder on your computer to save new files to.
•
If your camera has no new files, the pop-up window for saving
new files will not appear.
7
Select Yes.
•
New files are transferred to the computer.
For Windows Vista and Windows 7, select Run iStudio.exe from the
AutoPlay window.
Transferring files using Intelli-studio
Intelli-studio starts automatically when you connect the camera to
your computer with the USB cable.
The battery charges while the camera is connected to a computer with the
USB cable.
1
In Shooting or Playback mode, press [
m
].
2
Select
n
PC Software On.
3
Turn off the camera.
4
Connect the camera to your computer with the USB
cable.
You must plug the end of the cable with the indicator light (S) into
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.