Sanyo SID-70 Security Camera User Manual


  Open as PDF
of 19
 
COLOR DOME CAMERA User Guide
20
COLOR DOME CAMERA User Guide
21
Operating Your Camera
•WhiteBalancemaynotworkproperlyunderthefollowingconditions.Inthiscaseselect
theAWCmode.
❶ Whenthecolortemperatureoftheenvironmentsurroundingthesubjectisoutofthe
control range (e.g. clear sky or sunset).
2
Whentheambientilluminationofthesubjectisdim.
3

Ifthecameraisdirectedtowardsafluorescentlightorisinstalledinaplacewhere
illumination changes dramatically, the White Balance operation may become unstable.
Notes
AWCSET : To find the optimal luminance level for the current environment, point
the camera towards a sheet of white paper and press the Function
Setup switch. If the environment changes, readjust it.
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR
OFF
5.BACKLIGHT OFF
SSDR (Samsung Super Dynamic Range)
SSDR illuminates darker areas of an image while retaining the same light level for brighter
areas to even out the overall brightness of images with high contrast between bright and
dark areas.
SSDROFF
1. When the SETUP menu screen is displayed, select ‘SSDR’ by using the Function Setup
switch so that the arrow indicates ‘SSDR’.
2. Use the Function Setup switch to change the SSDR level in the sub menu according to
the contrast between bright and dark areas.
SSDRON
BACKLIGHT
Unlike conventional cameras, the SID-70 is designed so that it delivers a distinctive subject
and background at the same time, even when the subject is in backlight, by adopting a
function of the proprietary W-V DSP chip.
1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function
Setup switch so that the arrow indicates ‘BACKLIGHT’.
2.
Select a desired mode using the Function Setup switch depending on the camera purpose.
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR
OFF
5.BACKLIGHT OFF
6.SSNR3 ON
BLC :
Enables a user to select a desired area on a picture and view that area more clearly.
- LEVEL : Adjust level of the BLC function.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
 previous next