Sanyo SID-70 Security Camera User Manual


  Open as PDF
of 19
 
COLOR DOME CAMERA User Guide
16
COLOR DOME CAMERA User Guide
17
Operating Your Camera
Use the Function Setup switch within the camera.
Function Setup switch
Menu Setup
2. Select a desired function using the Function Setup switch.
•Placethecursoroveradesireditem.
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select ‘EXIT’ and press the Function Setup switch.
•Anitemwiththe icon also has sub menus. To select a sub menu, select an item with
theiconandpresstheFunctionSetupswitch.
•Anitemwiththe---iconisunavailableduetofunctionsettings.
Notes
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR
OFF
5.BACKLIGHT OFF
6.SSNR3 ON
7.DAY/NIGHT AUTO
8.SPECIAL
9.EXIT SAVE
Selectthefunctionusing
theFunctionSetupswitch.
Changethestatususing
theFunctionSetupswitch.
1. Press the Function Setup switch.
•Mainsetupmenuisdisplayedonthemonitorscreen.
Using this function, you can control the screen brightness.
1. When the SETUP menu screen is displayed, selectLENSby using the Function
Setup switch so that the arrow indicatesLENS.
LENS
MAIN SETUP
1.LENS DC
2.EXPOSURE
2. The Lens mode has sub menu site as listed below.
- BRIGHTNESS : Adjusts the video brightness.
- FOCUS ADJ : To adjust the lens focus correctly, you must activate the Focus Settings
mode. To activate the Focus Settings mode, adjust the lens focus, and then deactivate
the settings mode.
- You can adjust the shutter value of ESC shutter mode.
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
EXPOSURE
1. When the SETUP menu screen is displayed, select 'EXPOSURE’ by using the Function
Setup switch so that the arrow indicates 'EXPOSURE’.
2. Select a desired mode using the Function Setup switch.
BRIGHTNESS : Adjusts the video brightness.
 previous next