Sanyo SID-70 Security Camera User Manual


  Open as PDF
of 19
 
COLOR DOME CAMERA User Guide
26
COLOR DOME CAMERA User Guide
27
Operating Your Camera
IMAGE ADJ :
1) When the SPECIAL menu screen is displayed, select ‘IMAGE ADJ’ by using the
Function Setup switch so that the arrow indicates ’IMAGE ADJ‘.
IMAGE SETUP
1. V-REV OFF
2. H-REV OFF
3. D-ZOOM OFF
4. FONT COLOR WHITE
5. SHARPNESS ON
6. RETURN
2) Select a desired mode using the Function Setup switch.

•V-REV : You can flip the picture vertically on the screen.

•H-REV : You can flip the picture horizontally on the screen.

• D-ZOOM : You can use a digital zoom of x1 ~ x16.

• FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue)
•WhentheV-REVorH-REVmodeisenabled,thetextonthescreendoesnotflip.
•IfyouincreasetheSHARPNESSleveltoohigh,thepicturemaybecomedistortedor
noise may appear.
Notes
Monitor : Please change the settings value of video
appropriate to your monitor.
 -LCD :Pleaseselectthismenuitemwhenusingan
LCD monitor.
Youcanchangethegamma,PEDleveland
color gain in the sub menus.
 -CRT :
PleaseselectthismenuitemwhenusingaCRT
monitor.
 -USER:
Pleaseusethismenuitemwhenusingamonitorotherthanstandardones.You
canchangethegamma,PEDlevel,andcolorgaininthesubmenus.
CAM TITLE : If you enter a title, the title will appear on the monitor.
1) If the SPECIAL menu screen is displayed, use the Function Setup switch so that the
arrow indicates ‘CAM TITLE’.
SPECIAL
1. IMAGE ADJ
2. MONITOR LCD
3. CAM TITLE OFF
4. SYNC INT
5. MOTION DET OFF
6. PRIVACY OFF
7. DIS OFF
8. LANGUAGE ENGLISH
9. RETURN
2. Select a desired mode using the Function Setup switch.

•SHARPNESS : As you increase this value, the picture outline becomes stronger and
clearer. Adjust this value appropriately depending on the sharpness of
the picture.

•RETURN : Select this to save the settings for the IMAGE ADJ menu and to return
to the SPECIAL menu.
2) Set it to ‘ON’ by using the Function Setup
switch.
3) Press the Function Setup switch.
4) Use the Function Setup switch to move
to a desired letter and select the letter by
pressing the Function Setup switch.
Repeat this to enter multiple letters. You
can enter up to 15 letters.
CAMERA TITLE SETUP
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
-.0123456789
CLR POS END
 previous next