Sanyo SID-70 Security Camera User Manual


  Open as PDF
of 19
 
COLOR DOME CAMERA User Guide
24
COLOR DOME CAMERA User Guide
25
Operating Your Camera
You can display pictures in color or in black and white.
1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Function
Setup switch so that the arrow indicates ‘DAY/NIGHT’.
DAY/NIGHT
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR
OFF
5.BACKLIGHT OFF
6.SSNR3 ON
7.DAY/NIGHT AUTO
8.SPECIAL
2. Select a desired mode using the Function Setup switch according to the picture display
you want.
COLOR : The picture is always displayed in color.
B/W : The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
AUTO : The mode is switched to ’Color‘ in a normal environment, but switches to
’B/W‘ mode when ambient illumination is
low. To set up the switching time for AUTO
mode, press the Function Setup switch.
You can turn on or off the burst signal on
B/W mode.
-DURATION:Youcanselecttheday/nightswitching
point.
•WhenAGCintheEXPOSUREmenuis'OFF','---'modeoperatesasselecting'COLOR'
modeand'AUTO'modecannotbeselected.
Notes
*Theday/nightswitchingpointofthe
camera can be adjusted.
Color ➞ B/W B/W ➞ Color
Early
2.5 lux 5 lux
Late
1 lux 10 lux
1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup
switch so that the arrow indicates ‘SPECIAL’.
SPECIAL
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR
OFF
5.BACKLIGHT OFF
6.SSNR3 ON
7.DAY/NIGHT AUTO
8.SPECIAL
-DWELLTIME:Youcanselectthedurationtimeaboutchangingtheday/nightmode.
3s,5s,7s,10s,15s,20s,30s,40,60s
 previous next