Filter
Top Products
45 English
EXPOSURE CORRECTION
When capturing images, you can make the image lighter or darker.
1 Point the camera lens at the
subject.
h If the Mode Select Screen or a
menu screen (Shooting Setting
Screen) is active, press the MENU
button to exit it.
2 With the Shooting Setting Screen
not shown, toggle the SET button to
the right.
h The exposure correction bar
appears.
3 Toggle the SET button to the left or
right to adjust the exposure.
h The exposure setting numerical
value is shown at the left end of the
exposure bar. The exposure can be
set to a value from –1.8EV to
+1.8EV.
h To cancel the exposure correction
bar, press the MENU button.
h The exposure correction setting
can also be accessed from the
Shooting Setting Screen (page 58).
HINT
The exposure correction setting is canceled in the following cases:
iWhen the pointer is set to the center position.
iWhen the Option Screen is accessed.
iPress the playback button [H].
iAfter the power is turned off.
MENU button
SET button
Exposure correction bar
Pointer