Sealife DC250 Digital Camera User Manual


 
21
E
E
GETTING STARTED
You can use either 2 AA size batteries (High-Energy Alkaline, Ni-MH) or an AC
power adapter (optional accessory) to power the camera. Battery power is
convenient for recording images or video clips while AC adapter power is
recommended for transferring images to your computer.
Installing the batteries
1. Make sure the camera is off.
2. Slide the battery/SD card cover in the direc-
tion of the OPEN arrow.
3. Insert the batteries according to the correct
polarity marks (+ or -).
4. Close the battery/SD card cover firmly.
We recommend Sealife Ni-MH batteries for long lasting operation.
If you won’t be using the batteries for an extended period of time, remove
them from the camera to prevent leaks or corrosion.
Never use manganese batteries.
Never use different types of batteries (together) or mix old and new batteries.
Using the AC power adapter
(optional accessory)
1. Make sure the camera is off.
2. Open the DC IN jack cover and connect one
end of the AC power adapter to the DC IN
jack on the camera.
3. Connect the other end to an electrical outlet.
• Make sure to use only the specified AC power adapter (3.3 DC volt) for the
camera. Otherwise, it may cause damages to the camera, which is not
covered under the warranty. SeaLife item #SL13132.
• To prevent unexpected auto power off resulting from no battery power left
during the process of transferring your images to the computer, use the AC
power adapter as a power supply.