Filter
Top Products
26
E
Using the LCD monitor
1. Open the lens cover.
2. Turn the mode dial to the mode.
3. Turn the camera on by pressing the button.
4. Turn the LCD monitor on and off by pressing the
button.
5. Compose the picture.
6. Press the shutter button.
■ The LED indicator blinks green while the camera is processing a captured
image.
• The image on the LCD monitor darkens when in strong sunlight or bright light.
This is not a malfunction.
• Using the LCD monitor for an extended period of time will decrease the
battery life and the number of images you can take. To increase battery life,
turn the LCD monitor off and use the optical viewfinder instead.
• Always use the image LCD for macro shots.
• The LCD monitor must be on when Digital Zoom is to be used.
The normal focus setting is used to take images
where the distance to the subject is 3 ft. (75 cm)
or more. Select this setting for general shooting,
including portraits and scenery.
1. Open the lens cover, turn the mode dial to
the mode, and power on the camera.
2. Move the focus switch located on the front
side of the camera to the position.
3. Compose the picture.
4. Press the shutter button.
Set Focus to Normal Distance
Camera’s focus is set to normal
distance.
• The shooting distance for underwater pictures are different than land pictures.
Underwater pictures are in focus from 2 ft. (50cm) to infinity.