Filter
Top Products
107
Customizing Your Camcorder
Changing the menu settings
Icon/item
CH SELECT
AUDIO MIX
A/VtDV OUT
NTSC PB
LCD B. L.
LCD COLOUR
VF B.L.
GUIDEFRAME
Mode
z CH1, CH2
CH1
CH2
—
z OFF
ON
z ON PAL TV
NTSC 4.43
z
BRT NORMAL
BRIGHT
—
z
BRT NORMAL
BRIGHT
z OFF
ON
Meaning
To play back the CHs 1/2 audios from each
channel. However, if you play back the
audios via the camcorder’s speaker, the
audios are mixed.
To play back the CH1 audio from both
channels 1/2.
To play back the CH2 audio from both
channels 1/2.
To adjust the balance between the channels
1/2 (CH1/2) and channels 3/4 (CH3/4)
(p. 87).
To output analog images in digital format
using your camcorder.
To output digital images in analog format
using your camcorder.
To play back a tape recorded on your
camcorder on a PAL system TV.
To play back a tape recorded in the NTSC
colour system on a TV with the NTSC 4.43
mode.
To set the brightness on the LCD screen to
normal.
To brighten the LCD screen.
To adjust the colour on the LCD screen with
the SEL/PUSH EXEC dial.
To set the brightness on the viewfinder
screen to normal.
To brighten the viewfinder screen.
Does not display the guide frame.
Displays the guide frame (p. 35).
POWER
switch
VCR
VCR
VCR
VCR
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
CAMERA
MEMORY
Notes on LCD B.L. and VF B.L.
•When you select “BRIGHT,” battery life is reduced a little during recording.
•When you use power sources other than the battery pack, “BRIGHT” is automatically
selected.
CH1
2
CH3
4
To get low-
intensity
To get high-
intensity