Sharp DSR-PD150P Camcorder User Manual


 
40
Using special effects Digital effect
(1) In standby or recording mode, press DIGITAL EFFECT. The digital effect
indicator appears.
(2) Turn the SEL/PUSH EXEC dial to select the desired digital effect mode.
The digital effect indicator changes as follows:
STILL y FLASH y LUMI. y TRAIL y OLD MOVIE
(3) Press the SEL/PUSH EXEC dial. The indicator lights up and the bar appears.
In STILL and LUMI. modes, the still image is stored in memory.
(4) Turn the SEL/PUSH EXEC dial to adjust the effect.
Items to be adjusted
STILL The rate of the still image you want to superimpose on the
moving picture
FLASH The interval of flash motion
LUMI. The colour scheme of the area in the still image which is to be
swapped with a moving picture
TRAIL The time until the incidental image vanishes
OLD MOVIE No adjustment necessary
The longer the bar on the screen, the stronger the digital effect. The bar appears in the
following modes: STILL, FLASH, LUMI. and TRAIL.
To cancel the digital effect
Press DIGITAL EFFECT. The digital effect indicator disappears.
3
4
LUMI.
1
2
LUMI.
DIGITAL
EFFECT