Sharp DSR-PD150P Camcorder User Manual


 
34
Shooting with all the pixels – PROG. SCAN
To import moving images to your PC to view still images, we recommend you record in
progressive mode. To use progressive mode, follow the procedure below. Still images
produced this way are more stable than those recorded on a mini DV in normal mode,
and thus are more suitable for analysing high-speed action such as sports scenes. (Since
this camcorder takes in an image every 1/15 of a second in progressive mode, moving
images recorded in this mode may be subject to too much jitter. To view moving
images, we recommend recording in normal mode.)
(1) Press MENU to display the menu in standby mode.
(2) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select PROG. SCAN, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(5) Press MENU to erase the menu display. The PROG. SCAN indicator lights up.
To return to normal mode
Select OFF in step 4, then press the SEL/PUSH EXEC dial.
Note on the progressive mode
A normal TV broadcast divides the screen into two finer fields and displays them in
turns every 1/50 of a second. Thus, the actual image displayed in an instant covers only
half of the apparent image area. Displaying the whole image simultaneously on a full
screen is called displaying with all the pixels. In this mode, the resolution of the still
picture is clearer than in the normal mode. This camcorder takes in an image every 2/25
of a second, which may cause the image of a moving object to go out of focus. This
camcorder is originally programed to record in the normal TV format.
When shooting under fluorescent light
When shooting in progressive mode under fluorescent light or light bulbs, a rare
phenomenon may happen in which the screen lights up brightly (Flicker phenomenon).
This is not a malfunction. If you want to stop this phenomenon, set PROG. SCAN to
OFF in the menu settings.
On digital zooming
You cannot use digital zooming in this mode.
When the auto logo insert function is activated
You cannot use the progressive mode.
2-4
AUTO SHTR
PROG. SCAN
[
MENU
]
:
END
MANUAL SET
MANUAL SET
AUTO SHTR
PROG. SCAN
RETURN
OFF
ON
[
MENU
]
:
END
MANUAL SET
AUTO SHTR
PROG. SCAN
RETURN
ON
[
MENU
]
:
END
1
5
PROG. SCAN
MENU
MENU