Filter
Top Products
22
Recording a picture
Using the digital zoom – Zoom greater than 12×
Zoom greater than 12× is performed digitally, if you set D ZOOM to 24× or 48× in the
menu settings. The digital zoom function is set to OFF as a default setting (p. 104). If
you use the digital zoom function, the picture quality deteriorates.
You cannot use the digital zoom:
– When you set PROG. SCAN to ON in the menu settings (p. 104).
– When the POWER switch is set to MEMORY.
Indicators displayed during recording
The indicators are not recorded on the tapes.
[a]Remaining battery time indicator
This appears after you turn on the power and wait for a while.
[b]Cassette memory indicator
This appears when using a tape with cassette memory.
[c] STBY/REC indicator
[d]Time code/User bits
[e]Remaining tape indicator
This appears after you insert a cassette.
[f] Guide frame
[g]DVCAM format/DV format in SP mode indicator
[h]Audio mode indicator
[i] Time indicator
[j] ND filter indicator
The most suitable mode will flash regardless of the current mode.
When you have selected it, the ND filter mode displayed on the LCD screen or in the
viewfinder will disappear.
[k]Date indicator
00:00:00:01
12:05:56
32K
DVCAM
45min
40
min
REC
ND
1
[a] [b] [c]
[k]
[j] [i]
[g]
[h]
[e]
[f]
[d]
4 7 2000
T
W
The right-ended portion of the bar
shows the digital zooming zone.
The digital zooming zone appears
when you set D ZOOM to 24× or 48×.