Filter
Top Products
36
Useful Features
Still Recording Effect (PHOTO
SHOT)
You can use a still recording effect to record
the still images. A still picture is recorded
following the sound and visual effects of a
camera shutter closing.
Setting a still recording effect
1 Set the camcorder to CAMERA mode.
2 Press the MENU/DISPLAY button until
the menu screen appears.
3 Select Y, then press r on the
Operation button. Select “PHOTO
SNAP” (1), then press r (2).
4 Press d or y to select “SNAP” or
“STILL” , then press e.
PHOTO SNAP
DGTL ZOOM
TAPE SPEED
CAMERA SET
SNAP
STILL
EFF.SNAP
PHOTO SNAP STILL
5 Press d or y (1) to select “SNAP
EFF.”, then press r (2).
6 Press d or y to select “PHOTO
SHOT” then press e.
7 Press the MENU/DISPLAY button to
turn off the menu screen.
Using PHOTO SHOT mode
1 In Recording Standby mode, press the
STILL button.
• A still image of the subject
is displayed.
2 Press the REC START/STOP
button.
• The still image of the subject
will be recorded.
OFF
PHOTO SNAP
PHOTO SHOT
DGTL ZOOM
TAPE SPEED
CAMERA SET
EFF.SNAP
PHOTO SHOT
EFF.SNAP
To cancel the still image
In SNAP mode, press the STILL button while
the camcorder is in Recording Standby
mode.
In STILL mode, press the STILL button.
To cancel still recording effect
Select “OFF” in step 5 of “Setting a still
recording effect”.
Notes:
• PHOTO SHOT can also be used during
recording by pressing the STILL button.
• If you use PHOTO SHOT during recording, the
visual effects of a camera shutter closing are
recorded.
• You can use PHOTO SHOT without the sound
effect of a camera shutter closing by setting the
SOUND menu item to “OFF” (see page 49).
• The picture quality in PHOTO SHOT mode will be
slightly lower than normal pictures.