Sharp VL-WD250U Camcorder User Manual


 
60
Advanced Features
Audio Dubbing
1 Play back the recorded Mini DV cassette
and locate the tape position where you
wish to start audio dubbing.
2 Press y to pause playback.
3 Press the MENU/DISPLAY button until
the menu screen appears.
4 Select V, then press r on the
Operation button. Select AUDIO DUB
(1), then press r (2).
The audio dubbing screen appears.
AUDIO DUB
PIC.
EFFECT
AUDIO
PB EFFECT
PLAYBACK SET
AUDIO
AUDIO
START
STOP
DUB
12
+
CANCEL MENU DISPLAY
To pause audio dubbing
Press e.
To quit audio dubbing
Press the MENU/DISPLAY button. The audio
dubbing screen disappears.
If you wish to change the dubbed audio
or dub additional scenes
1 Press the MENU/DISPLAY button to
turn off the audio dubbing screen.
2 Repeat steps 1 to 5 above.
Notes:
Audio dubbing cannot be used with record-
ings made in LP mode.
It is recommended that you use Audio Dubbing
only with recordings made with this camcorder.
Use of recordings made with other digital video
equipment may result in poor audio quality.
Audio dubbing will automatically pause if the
original audio changes from 12-bit mode to 16-
bit mode or vice versa. Press e to resume
operation.
Audio dubbing will automatically stop if a portion
recorded in LP mode is encountered.
You can play back the dubbed audio and the
original audio together or separately (see
Selecting the Audio Playback Mode on next
page).
AUDIO
START
STOP
DUB
AUDIO
12
+
5 Press e to begin audio dubbing.
Record your narration.