Filter
Top Products
26
27
Viewing pictures on a TV
If you attach the camera to the video-out unit
(supplied) and connect to a TV using the
video cable (supplied), you can view your
pictures on the TV screen.
1
Attach a battery to the video-out unit
(page 14).
2
Remove the terminal cover of the
camera, then attach the video-out unit
to the camera and connect the output
terminal on the video-out unit to the TV’s
video input terminal using the video
cable.
To detach the video-out unit, loosen the
locking screw and pull the video-out unit
straight out while pressing the release
button.
Video-out unit
Remove the
terminal cover.
Tighten the
locking screw.
To the TV
Release button
3
Switch on the power of the video-out
unit so that the power lamp lights up
(green).
4
Turn on the camera and TV and select
the video input on the TV.
5
Set the camera to playback mode to
view the pictures. For detailed
instructions, see page 26.
Note
• When the video-out unit is attached to the camera,
pictures do not appear on the camera screen.
Viewing pictures on a computer
screen
To view the pictures on your computer, insert
the “Memory Stick Duo” into the Memory
Stick adapter (supplied) before inserting it in
the Memory Stick slot of the computer or a
Memory Stick reader. (You can insert the
“Memory Stick Duo” directly in your
computer if it has a Memory Stick Duo slot.)
For instructions on playing, saving and
editing images, please refer to your
computer’s instruction manual or the help of
the software you are using.
“Memory Stick Duo”
Memory Stick
Duo adapter
Example of image storage
This camera stores images on the “Memory
Stick Duo” to the “100MSDCF” folder in the
“DCIM” folder.
3
Slide your finger left or right on the
touch pad to display each picture. To go
back from the last picture you took, slide
your finger from right to left. To view the
pictures sequentially, slide your finger
from left to right. If you keep your finger
on the touch pad at the left or right end,
you can view pictures consecutively.
A picture may take some time to appear
on the screen due to its size and quality.
Reviewing pictures
1
Insert a recorded “Memory Stick Duo” in
the camera.
2
Set the camera to playback mode. If the
camera is in camera mode, touch the
center of the touch pad twice to switch
to playback mode. When the camera
switches to playback mode, the last
picture you took appears on the screen.
If you switch back from camera mode
without taking a picture, the last picture
you viewed reappears on the screen.
Touch pad
Taking & Reviewing
Pictures