Filter
Top Products
86 Chapter 4 Viewfinder Screen Indications and Menus
Chapter 4 Viewfinder Screen Indications and Menus
Item
MARKER
Selects ON/OFF setting for
center marker, size setting
(percentage of viewfinder
screen area), and display
ON/OFF setting.
CENT/90% (normal value):
Displays center marker and
safety zone marker at 90%
size.
CENT/80%: Displays center
marker and safety zone
marker at 80% size.
90%: Displays only safety
zone marker at 90% size.
80%: Displays only safety
zone marker at 80% size.
CENT: Displays only center
marker.
ZEBRA
Selects type of zebra pattern
display.
1 (normal value): Displays
the zebra pattern over parts
having a video level.
between 70 and 90 IRE (or
70 and 90%).
Use the next item (ZEBRA1)
to select the base level.
2: Displays the zebra pattern
over parts having video
levels of 100 IRE or above
( or 100% or above).
1/2: Dual display (both 1
and 2)
ZEBRA1
Sets base level for zebra
pattern 1.
70 IRE (normal value) to 90
IRE or 70% (normal value)
to 90%
Can be set for each IRE
step or 1% step.
INT (normal value):
Recording time of the
internal VCR
EXT: Recording time of the
external VCR
×1: Uses only the upper
REC/TALLY indicator.
×2 (normal value): Uses
two REC/TALLY indicators.
Settings
–99 to ±0 (normal value) to
+99
Negative values set softer
edges and positive values
set sharper edges.
VF TALLY
Selects whether or not to use
more than one REC/TALLY
indicators in the viewfinder
(displayed only when the
DXF-701WS/701WSCE
viewfinder is attached).
Advanced menu page 4
PAGE4 (NEXTm$ PREVm4)
MARKER : CENT/90%
mZEBRA : 1
ZEBRA1 : 70IRE
a)
REC TIME: INT
VF SDTL : ±0
VF TALLY:
×
2
EXIT MENU (YESmPUSH)
a) For DSR-300P: 70%
Advanced menu page 5
PAGE5 (NEXTm$ PREVm4)
mSS IND: ALWAYS
LL IND: ON
IRIS IND: ON
GAIN IND: ON
FILTER IND: ON
WHITE IND: ON
SKIN IND: ON
EXIT MENU (YESmPUSH)
REC TIME
Selects whether to show the
recording time (TTL) of the
internal VCR or of the
external VCR.
VF SDTL
Sets the detail level of
images on the viewfinder
screen (displayed when
using a viewfinder other than
the DXF-701/701CE/701WS/
701WSCE).
Item
Settings
SS IND
Selects the mode for
showing the shutter setting
when displaying the normal
indications.
3SEC: Displays shutter
setting for three seconds only
when the setting has been
changed.
ALWAYS (normal value):
Displays the shutter setting at
all times.
LL IND
Selects whether or not to
show the LOW LIGHT
indication on the normal
indications when inadequate
lighting is detected.
ON (normal value):
Displays.
OFF: Not display.
IRIS IND
Selects whether or not to
show the lens’s F-stop value
(iris indication) on the
normal indications. The F-
stop value is always
displayed when in EZ mode.
ON (normal value):
Displays.
OFF: Not display.
GAIN IND
Selects whether or not to
always show the gain
setting indication on the
normal indications.
ON (normal value): Always
displays.
OFF: displays for two
seconds only when the
setting has been changed.
FILTER IND
Selects whether or not to
always show the FILTER
knob setting indication on
the normal indications.
The FILTER knob setting
indication is always
displayed when in EZ mode.
ON (normal value): Always
displays.
OFF: Displays for two
seconds only when the
setting has been changed.
WHITE IND
Selects whether or not to
show the setting of the white
balance switch.
ON (normal value): Displays.
OFF: Not display.
SKIN IND
Selects whether or not to
show the setting for skin
detail correction.
ON (normal value): Displays.
OFF: Not display.
Viewfinder Advanced Menu