Filter
Top Products
94
[SUPER NIGHTSHOT] cannot be
operated.
• Set the NIGHTSHOT switch to ON.
[COLOR SLOW SHTR] does not
operate correctly.
• [COLOR SLOW SHTR] may not operate
correctly in total darkness. Use NightShot
or [SUPER NIGHTSHOT].
You cannot adjust [LCD BL LEVEL].
• You cannot adjust [LCD BL LEVEL]
when:
–The LCD panel is closed on your
camcorder with the LCD screen facing
out.
–The power is supplied from the AC
Adaptor.
Images cannot be played back.
• Select the media and the image quality of a
movie you want to play back by touching
(HOME) t (MANAGE
MEDIA) t [MOVIE MEDIA SET]/
[PHOTO MEDIA SET] (p. 22).
Still images cannot be played back.
• Still images cannot be played back if you
have modified files or folders, or have
edited the data on a computer. (The file
name flashes in that case.) This is not a
malfunction (p. 106).
• Still images recorded on other devices may
not be played back. This is not a
malfunction (p. 106).
“ ” is indicated on an image in the
VISUAL INDEX screen.
• This may appear on still images recorded
on other devices, edited on a computer, etc.
• You removed the AC Adaptor or the
battery pack before the ACCESS lamp is
turned off after recording. This may
damage your image data and is
displayed.
“ ” is indicated on an image in the
VISUAL INDEX screen.
• Execute [REPAIR IMG.DB F.] (p. 65). If it
still appears, delete the image with
(p. 49).
No sound or only a quiet sound is
heard during playback.
• Turn up the volume (p. 37).
• Sound is not output when the LCD screen is
closed. Open the LCD screen.
• When you record sound with [MICREF
LEVEL] (p. 88) set to [LOW], the recorded
sound may be difficult to hear.
• Sounds cannot be recorded while shooting
a 3-second movie (approx.) using [SMTH
SLW REC].
Left and right sound will be heard
unbalanced when playing back on
computers or other devices.
• This happens when sound recorded in 5.1ch
surround is converted to 2ch (normal stereo
sound) by a computer or other device
(p. 31). This is not a malfunction.
• Change the sound conversion type
(downmix type) when playing back on 2ch
stereo devices. Refer to the instruction
manual supplied with your playback device
for details.
• Change the sound to 2ch when creating a
disc using the supplied software “Picture
Motion Browser.”
• Record sound with [AUDIO MODE] set to
[2ch STEREO] (p. 69).
Playing back images