Filter
Top Products
10
Getting started
Step 1: Charging the battery pack
You can charge the “InfoLITHIUM” battery pack (H series) after attaching it to your
camcorder.
You cannot attach any “InfoLITHIUM” battery pack other than the H series to your camcorder.
1
Turn off your camcorder by retracting the viewfinder and closing the LCD
screen.
2
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
3
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
Align the mark on the DC plug with that on the DC IN jack.
The /CHG lamp lights up and charging starts. The /CHG lamp turns off when the
battery pack is fully charged.
4
When the battery is charged, disconnect the AC Adaptor from the DC IN
jack of your camcorder.
Battery pack
DC IN jack
DC plug
AC Adaptor
Power cord (mains lead)
ACCESS lamp
(hard disk)
/CHG lamp
To the wall outlet (wall socket)