Filter
Top Products
114
Notes
•Remove dirt from the surface of the flash if it is dirty. If the surface of the flash is
shaded or caked with dirt heated by strobing, the flash may not be able to give off a
sufficient amount of light.
•The recommended shooting distance using the built-in flash is 0.3 m to 2.5 m (31/32
feet to 8 1/3 feet).
•Attaching the lens hood (supplied) or a conversion lens (optional) may cause their
shadow to appear.
•You cannot use an external flash (optional) and the built-in flash at the same time.
•Auto red-eye reduction ( ) and Forced red-eye reduction ( ) may not produce the
desired effect depending on individual differences, the distance to the subject, the
subject not looking at the pre-recording flash or other conditions.
•The flash effect cannot be obtained easily when you use forced flash in a bright
location.
•When recording with the flash, it takes longer to prepare for the next shooting. This is
because your camcorder starts to charge power for firing after the flash pops up.
•The flash charge lamp flashes while the power for firing is being charged. After
charging is completed, the flash charge lamp lights up.
•If it is not easy to focus on a subject automatically, for example, when recording in the
dark, use HOLOGRAM AF (p. 115) or the focal distance information (p. 63) for
focusing manually.
•When the flash pops up, it may be up against the accessory attached to the intelligent
accessory shoe depending on the accessory used together. In this case, set the built-in
flash to (No flash). When you are using the external flash, the built-in flash will not
pop up.
The flash does not fire even if you select auto and (auto red-eye reduction)
during the following operations:
– NightShot
– SPOTLIGHT of PROGRAM AE
– SUNSETMOON of PROGRAM AE
– LANDSCAPE of PROGRAM AE
– Manual exposure
– Flexible Spot Meter
While recording images continuously
The flash does not work.
Recording still images on a “Memory Stick”
– Memory Photo recording