Filter
Top Products
80
You can duplicate selected scenes (programs) for editing onto another tape without
operating the VCR.
Scenes can be selected by frame. You can set up to 20 programs.
Your camcorder can dub on a “Memory Stick.” See page 127 for details.
Before operating Digital program editing having the tape
recorded on other equipment
Step 1 Connecting to the VCR.
Step 2 Setting the VCR for operation (p. 81).
Step 3 Adjusting the synchronization of the VCR (p. 84).
When you dub using the same VCR again, you can skip Step 2 and 3.
Using Digital program editing having the tape recorded on
other equipment
Operation 1 Making a program (p. 86).
Operation 2 Performing the program (Dubbing on the tape) (p. 88).
Note
When editing digital video, the operation signals to the VCR cannot be sent with the
LANC jack.
Step 1: Connecting to the VCR
You can connect either the A/V connecting cable or the i.LINK cable.
Connect the devices as illustrated on page 78.
Dubbing only desired scenes
– Digital program editing (on a tape)
Unwanted
scene
Unwanted
scene
Switch the order