Filter
Top Products
187
Troubleshooting
When operating using the “Memory Stick”
Symptom Cause and/or Corrective Actions
• The POWER switch is not set to MEMORY.
c Set it to MEMORY (p. 11).
• The “Memory Stick” is not inserted.
c Insert a “Memory Stick” (p. 104).
• The “Memory Stick” has already been recorded to its full
capacity.
c Delete unnecessary images and record again (p. 138).
• The “Memory Stick” formatted incorrectly is inserted.
c Format the “Memory Stick” using your camcorder or
use another “Memory Stick” (p. 104, 177).
• The write-protect tab on the “Memory Stick” is set to
LOCK.
c Release the lock (p. 102).
• You cannot record data in the 100MSDCF folder. It is only
for playing back data.
• If the HOLOGRAM AF light reaches the subject, the focus
is automatically adjusted.
c Wipe the HOLOGRAM AF emitter with a dry cloth.
• The image is protected.
c Cancel image protection (p. 137).
• The write-protect tab on the “Memory Stick” is set to
LOCK.
c Release the lock (p. 102).
• You are trying to delete more than a hundred image files
at once.
c You can select up to a hundred image files to delete on
the index screen.
• The write-protect tab on the “Memory Stick” is set to
LOCK.
c Release the lock (p. 102).
• The write-protect tab on the “Memory Stick” is set to
LOCK.
c Release the lock (p. 102).
• The write-protect tab on the “Memory Stick” is set to
LOCK.
c Release the lock (p. 102).
• The index screen does not appear.
c Press INDEX to display the index screen, then protect
the image (p. 137).
Operations on the “Memory Stick”
do not function.
Recording does not function.
The HOLOGRAM AF light from the
HOLOGRAM AF emitter deviates
from the center of the image.
The HOLOGRAM AF light from the
HOLOGRAM AF emitter is blurred
and adjusting the focus is difficult.
The image cannot be deleted.
You cannot format the “Memory
Stick.”
Deleting all the images cannot be
carried out.
You cannot protect the image.
Types of trouble and how to correct trouble
(continued on the following page)