Filter
Top Products
48
You can record still images or moving pictures using the self-timer. You can also use the
Remote Commander for this operation.
Recording on a tape
The POWER switch should be set to .
Operate by touching the panel.
(1) During standby, press FN and select PAGE2.
(2) Press SELFTIMER.
The
(self-timer) indicator appears on the screen.
(3) Press EXIT to return to FN.
(4) Press START/STOP.
The self-timer starts counting down from about 10 while beeping. In the last
two seconds of the countdown, the beep gets faster, then recording starts
automatically.
Recording still images on a “Memory Stick” during recording
standby
The POWER switch should be set to .
Operate by touching the panel.
(1) Follow Step 1 to 3 in “Recording on a tape.”
(2) Press PHOTO deeply.
The self-timer starts counting down from about 10 while beeping. In the last
two seconds of the countdown, the beep gets faster, then recording starts
automatically.
To stop the countdown during recording on the tape
Press START/STOP. To restart the countdown, press START/STOP again.
To cancel the self-timer
During standby, press SELFTIMER and the (self-timer) indicator disappears from
the screen. You cannot cancel the self-timer using the Remote Commander.
When the self-timer recording is finished
The self-timer is automatically canceled.
Self-timer recording
You can record using the self-timer only during recording standby.
When the POWER switch is set to MEMORY
You can also record still images on the “Memory Stick” with the self-timer (p. 124).
Self-timer recording
START/STOP
PHOTO
START/STOP
PHOTO